After-sales service terms

TONALE SAS — Electric guitars with aluminium bodies

Version: 28 October 2026

Article 1 — Purpose

These After-Sales Service Terms and Conditions set out the procedures for the handling, diagnosis, maintenance and repair of electric guitars with aluminium bodies marketed by TONALE SAS.

Their purpose is to ensure the durability, proper functioning and quality of TONALE instruments, while specifying the manufacturer’s commitments and the owner’s responsibilities.

These terms apply to after-sales service requests relating to TONALE instruments, subject to any mandatory statutory provisions applicable.

They neither replace nor restrict the statutory warranties owed to the customer.

Article 2 — Manufacturer identification

Company: TONALE SAS
Address: 1240 Rue de Venille, 58000 Saint-Éloi, France
After-sales service email: contact@tonaleguitars.fr
Telephone: +33 (0)3 86 60 78 35

All service requests must be submitted to TONALE’s after-sales service department before the instrument is shipped.

Article 3 — Specific features of aluminium-body guitars

TONALE electric guitars with aluminium bodies have specific characteristics arising from their design and the materials used.

Aluminium offers, in particular, good corrosion resistance in many conditions of use, useful dimensional stability and specific finishing possibilities. Nevertheless, it requires appropriate care in view of its surface and treatment.

Depending on the model and finish, the following phenomena may be normal and do not necessarily constitute a defect:

  • Slight handling or use marks on an unvarnished or brushed finish.
  • Minor variations in appearance resulting from the finish, lighting or manufacturing process.
  • Micro-scratches resulting from normal use.
  • Superficial marks that gradually appear on an exposed metal surface.
  • Differences in appearance between aluminium parts and other materials used in the instrument.

Any alleged defect shall be assessed having regard to the stated finish, the condition of the instrument upon delivery, the contractual specifications and the applicable warranties.

Any abnormal structural deterioration, crack, unusual deformation or defect affecting the safety or operation of the instrument must be examined by the after-sales service department.

Article 4 — Care and maintenance recommendations

In order to preserve the instrument’s appearance and functional characteristics, TONALE recommends observing the following precautions.

4.1. Cleaning the aluminium body

Cleaning should be carried out using a clean, soft, non-abrasive cloth, slightly dampened if necessary.

The following should be avoided:

  • Acidic or strongly alkaline products.
  • Solvents, paint strippers and aggressive chemicals.
  • Scouring powders, abrasive sponges and steel wool.
  • Polishing products that are not compatible with the applied finish.
  • Products intended for the care of other metals, unless their compatibility has first been verified.

A raw, brushed, anodised, painted or varnished finish may require different cleaning methods. In case of doubt, the owner should contact TONALE before using any care product.

Care products must not be allowed to enter electronic cavities, connectors, potentiometers or mechanical assemblies.

4.2. Humidity and environment

The instrument should be kept in a clean, dry environment, protected from excessive humidity, condensation and particularly corrosive atmospheres, especially saline environments.

Following exposure to perspiration, moisture or unusual conditions, it is recommended that the instrument be wiped with a soft cloth.

The instrument should not be left for extended periods in a vehicle exposed to intense heat or significant temperature fluctuations.

4.3. Storage and transport

For transport, the use of a case or gig bag providing adequate impact protection is recommended.

The instrument must be properly secured to prevent impacts to the body, neck, headstock, tuning machines and fastening components.

When moving from a cold environment to a warm environment, the instrument should be allowed to acclimatise gradually before intensive use, particularly if it has been exposed to extreme conditions.

4.4. Mechanical and electronic maintenance

Periodic inspection of the strings, tuning machines, screws and fasteners, bridge, connectors, potentiometers and other mechanical or electronic components helps ensure that the instrument functions properly.

Screws and assemblies must not be overtightened. Any work requiring substantial disassembly, modification of the body or an operation liable to damage the finish should be entrusted to a suitably qualified professional.

Adjustments to the neck, string action and intonation must be carried out in accordance with the specifications of the relevant model.

Article 5 — Opening an after-sales service case

All service requests must be sent to: contact@tonaleguitars.fr

Customers are invited to provide the following information:

  • The owner’s name and contact details.
  • The guitar model.
  • The instrument’s serial number.
  • The date and proof of purchase, where available.
  • A detailed description of the problem encountered.
  • Photographs or a video showing the defect, where relevant.
  • The circumstances in which the problem arose and details of any work previously carried out.

TONALE may request additional information in order to determine the appropriate service procedure.

A service case reference number may be provided to the customer. This number should be quoted in all subsequent correspondence.

No instrument may be shipped until TONALE has provided return instructions.

Article 6 — Diagnosis and service handling

Once the necessary information has been received, TONALE shall carry out an initial assessment of the request.

Depending on the circumstances, this assessment may result in:

  • Remote assistance.
  • Adjustment or maintenance instructions.
  • A request for additional photographs.
  • A physical inspection of the instrument.
  • Repair or replacement, where justified.
  • Preparation of a quotation where the work is not covered by warranty.

Where a physical examination is required, the customer shall be informed of the arrangements for shipment, receipt and return.

The time required for diagnosis shall depend in particular on the nature of the problem, the availability of parts and receipt of all necessary information.

TONALE shall inform the customer where a significant additional delay is foreseeable.

No chargeable repair work shall be undertaken without prior disclosure of its cost and the customer’s approval.

Article 7 — Statutory warranties

TONALE instruments benefit from the statutory warranties applicable, including the statutory legal guarantee of conformity and, where the relevant conditions are met, the warranty against hidden defects.

For consumers whose transactions are governed by French law, the statutory legal guarantee of conformity applies in accordance with Articles L. 217-3 et seq. of the French Consumer Code. The period for bringing a claim is, in principle, two years from delivery of the goods.

In the event of a defect covered by a statutory warranty, the customer shall benefit from the rights provided for under applicable legislation, including, depending on the circumstances, repair, replacement, price reduction or termination of the contract.

The statutory warranty against hidden defects applies in accordance with Articles 1641 et seq. of the French Civil Code.

The exercise of a statutory warranty may not be made subject to any additional condition not authorised by law, such as a requirement to produce a document which the customer is not legally required to provide.

Nothing in these After-Sales Service Terms and Conditions shall exclude or restrict those rights.

Article 8 — Any commercial warranty

If TONALE offers an additional commercial warranty, it shall be governed by separate terms specifying, in particular:

  • Its duration.
  • The items covered.
  • Any exclusions permitted by law.
  • The notification and service procedures.
  • The territory in which it applies.
  • The shipping and return arrangements.

In the absence of a written commercial undertaking, no additional commercial warranty shall be presumed.

Article 9 — Work and damage not covered by warranty

Chargeable work may be offered where the defect is not covered by an applicable warranty, subject to statutory requirements.

Following examination of the case, the following may in particular require work outside warranty coverage:

  • Accidental damage or impact damage.
  • Deterioration resulting from improper use or unsuitable storage, where this caused the damage.
  • Damage caused by the use of incompatible care products.
  • Modifications or repairs improperly carried out by a third party, where they caused the defect identified.
  • Normal wear and tear affecting strings, frets, potentiometers, tuning machines and other wear parts.
  • Damage resulting from unauthorised work that directly caused the failure.

These circumstances do not constitute automatic exclusions. Each request shall be assessed in light of the circumstances, the causal link between the alleged cause and the damage, and the applicable statutory and commercial warranties.

Before carrying out any chargeable repair, TONALE shall provide the customer with a quotation or estimate specifying the proposed work and the associated costs.

The work shall be carried out only after the customer has accepted the quotation.

Article 10 — Repair of the aluminium body

Work on an aluminium body may require specific techniques depending on the instrument’s design and finish.

Depending on the defect identified, the work may include, in particular:

  • Checking the geometry of the body.
  • Inspecting the neck, bridge and mechanical component mounting points.
  • Inspecting cavities and cable routes.
  • Checking surfaces, the finish and any deterioration.
  • Inspecting assemblies between the aluminium and components made from other materials.
  • Repairing or replacing components compatible with the model.

Any work likely to materially alter the instrument’s original appearance must be explained to the customer before it is carried out, particularly where the finish cannot be reproduced exactly.

A repair may result in a visual difference where the characteristics of the material or finish do not allow a perfectly identical restoration. This possibility must be disclosed before any chargeable work is carried out, without prejudice to TONALE’s obligations to repair or replace the instrument under a statutory warranty.

Article 11 — Electronics and components

After-sales service may also cover pickups, potentiometers, switches, jack sockets, wiring, solder joints, tuning machines, bridges and other instrument components.

The purpose of the diagnosis is to identify the cause of the malfunction and determine whether repair, replacement or adjustment is required.

Replacement parts must be compatible with the model and its specifications.

Where an identical part is no longer available, TONALE may offer a technically compatible alternative, subject to compliance with statutory obligations and, where necessary, the customer’s approval.

No material change to the instrument’s characteristics shall be made without informing the customer in advance.

Article 12 — Shipment of instruments for after-sales service

Where a physical return is required, TONALE shall provide the customer with the appropriate address and shipping instructions.

The customer must use packaging that provides sufficient protection to prevent damage during transport. It is recommended that sensitive parts be protected separately, that the instrument be secured against movement and that proof of dispatch be retained.

Responsibility for shipping costs shall depend on the reason for the return, the applicable warranty and the mandatory rules in force.

For returns made under a statutory warranty, any costs which TONALE is legally required to bear shall not be transferred to the customer.

Where no warranty or statutory obligation applies, transport costs may be charged to the customer after prior notice and in accordance with the agreed terms.

Customs formalities for international returns must be completed correctly in order, as far as possible, to avoid the goods being taxed again upon importation.

Customers are invited to contact TONALE before sending any international shipment in order to obtain the necessary instructions.

Article 13 — Repair timescales

Where possible, the estimated time for the work shall be communicated to the customer following diagnosis.

It may vary depending on:

  • The nature of the defect.
  • The availability of components.
  • The complexity of the work on the aluminium body.
  • The need to carry out specific finishing operations.
  • Shipping and transit times, particularly for international returns.

Where repair or replacement is due under a statutory warranty, TONALE shall comply with the timescales and conditions imposed by applicable legislation.

For work not covered by warranty, the estimated timescale shall be stated in the quotation or communicated to the customer before the work is approved.

Article 14 — Completion of repairs and return of the instrument

Upon completion of the work, TONALE shall inform the customer that the work has been completed and arrange for the instrument to be returned in accordance with the agreed arrangements.

Where appropriate, the work performed shall be summarised in a service report specifying the parts replaced, adjustments made and any maintenance recommendations.

The customer is invited to check the apparent condition of the instrument upon receipt and promptly report any irregularity identified. This recommendation shall not restrict the customer’s statutory rights.

Article 15 — Spare parts and future upgradability

TONALE endeavours, within the limits of its manufacturing and procurement capabilities, to offer spare parts compatible with its instruments.

The availability of parts depends on the model, its age and changes to components over time.

This document does not guarantee any specific period of spare-part availability, unless a specific undertaking or applicable legal obligation provides otherwise.

Where a part is in limited supply, TONALE may offer a compatible alternative, subject to compliance with the contractual specifications and applicable warranties.

Article 16 — Data protection

Information provided in connection with an after-sales service request shall be used to identify the customer and the instrument, process the request, monitor the work performed and comply with legal obligations.

Personal data shall be processed in accordance with TONALE’s privacy policy and the applicable personal data protection regulations.

Article 17 — Complaints

Any complaint relating to after-sales service work may be sent to:

TONALE SAS
1240 Rue de Venille, 58000 Saint-Éloi, France
contact@tonaleguitars.fr

The customer is invited to specify the after-sales service case reference number, the instrument model and the subject of the complaint.

TONALE shall endeavour to seek an amicable solution within a reasonable period.

Consumers’ statutory rights concerning mediation and dispute resolution shall remain applicable.

Article 18 — Final provisions

These After-Sales Service Terms and Conditions shall apply subject to statutory warranties, the terms and conditions of sale accepted by the customer and the mandatory provisions of the applicable law.

Any amendment to these terms shall apply to future requests and service work and shall not affect rights already acquired by the customer.

If any provision is held to be invalid or unenforceable, the remaining provisions shall remain in force to the extent permitted by law.